帝巨企業有限公司DICGU ENTERPRISE CO., LTD.

SW Series Switch (Water proof Type Switches)
Home > Products > Micro Switches >SW Series Switch
FEATURES:
  • Protection against ingress of dust φ1.0mm(ⅠP5X);
  • Protection against ingress of water(ⅠPX1);
  • Good feeling and more actuators and more terminals are applied
MATERIALS

Upper Housing: Nylong66 (UL94 V-0)
Base: Nylong66 (UL94 V-0)
Actuating Button: High Temperature PBT (UL94 V-0)
Cap: Rubber (UL94 V-0)
Chang Plate: Bronze
NC、NO、COM Terminals: Brass(Plating silver)
Contacts: Silver Alloy or plating Gold
Spring: SUS304
Auxiliary Actuator: Stainless Steel
SPECIFICATION
Mechanical life:100,000 cycles min;
Contact Rating: 5Amps @ 250 VAC; CUL, UL 10,000 cycles
Insulation Resistance:>100MΩ DC500V;
Withstand Voltage:AC1,000V 1 minute;
Contact Resistance:<100mΩ;
Operating Temper.:-25℃ to 85℃;
Operating Force:See Chart
Hand Soldering.:Use a soldering iron of 30 watts,controlled at 380℃
                                approximately 3 seconds while applying solder
HOW TO ORDER
ACTUATOR AND OPERATING FORCE CHART
ACTUATOR
OPERATING FORCE(gf)
FP(mm)
OP(mm)
REMARK
00
(NO LEVER)
115±40
130±40
150±40
175±45
250±50
12.5 ± 0.5
11.5 ± 05
01
45±20
50±20
55±25
60±25
100±40
04
40±20
45±20
50±20
55±25
90±30
05
40±20
45±20
50±20
55±25
90±30










TERMINAL OPTIONS (mm) ( Inches)
ACTUATOR SPECIFICATIONS (mm)

PACKING EXPLANATION:

Hacing different transport and exist differ package:
  1. 90 PCS for one case,78 cases for one box;
  2. HK:90 PCS for one case, 78 cases for one box;
  3. TAIWAN:90 PCS FOR ONE CASE,76 CASES FOR ONE BOX;

There is a new body type(the thickness is 6.4mm) of the “N” terminal waterproof switch.The base can be buckled a lower housing and the three terminals can be soldered three wires.Electronic encapsulation adhesive can be injected the lower housing airproof the solder to protect the wires.(the drawing as below)