帝巨企業有限公司DICGU ENTERPRISE CO., LTD.
 

TSE2 Series TACT SWITCH
Home > 產品資訊 > 輕觸開關 > TSE2 Series

FEATURES:

  • Small dimensions(6.0×6.0)
  • Mechanical life:min. 1 x 10 cycles
  • Good feeling.

 

SPECIFICATION

Contact Rating:50 mA @ 12VDC
Electrical life : 1,000,000 cycles
Mechanical life :1,000,000 cycles min
Position Travel :0.25±0.1
Insulation Resistance:>100MΩ DC250V
Withstand Voltage:AC250V 1 minute
Contact Resistance:<100mΩ
Ambient Temper.:-25℃ to70℃
Operating Force:80±20 gf;120±30 gf;180±50 gf
Soldering Process : Hand soldering :Use a soldering iron of 30 watts,controlled at 380℃ approximately 3 seconds while applying solder.
Wave soldering: When applying wave soldering, the peak temperature of the wave Oven should be set to 260℃max. Condition for soldering (Wave & Non-washable Type) Temperature Profile:(Figure 1)
Reflow soldering: When applying reflow soldering, the peak temperature of the reflow Oven should be set to 250℃max. Condition for soldering (Reflow & Non-washable Type) Temperature Profile:(Figure 2)


Wave soldering (Figure 1)

Rellow soldering (Figure 2)


HOW TO ORDER
TERMINAL AND COVER OPTIONS
TSE2 Series TACT SWITCH
TSE2-01PA
TSE2-01PB
TSE2-01MA
TSE2-01 PA- □□ - **
TSE2-01MB

PACKING EXPLANATION :

60,000 PCS for one big box(1,000 PCS for one bag, 10bags for one small carton,6 small cartons for one big box.)
Canal packaging : 80 switches shall be packed in a strip ;Ten(10) strips at maximum shall be packed in a bag. Canal form and dimensions


TSE2-**P


TSE2-**M